
Key Features
- Low start-up wind speed -
1.8m /s, greatly improves efficiency.
- Low rotating speed, 40 rpm to
generate rated power.
- No noise, <63db at 10m
distance.
- Blades to regulate angles
automatically every 30 seconds, to increase the windward area at low
speed and decrease it at fierce wind.
- Hydraulic tower for easy installation
and maintenance.
- Remote monitoring.
- Optional heating blades.
Technical data
Rated output
capacity:KW
|
30
|
DC line voltage:V
|
500
|
Start-up wind
speed:m/s
|
1.8
|
Cut-in wind speed:m/s
|
Wind speed≥2.9m/s
should continue to at least 30 minutes
|
Rated wind speed:m/s
|
9
|
Rated rotating
speed:rpm
|
40
|
Grid voltage:V
|
3AC 400V±5%
|
Grid frequency :Hz
|
50 /60 ±0.5
|
Inverter capacity:KVA
|
37.5
|
Output rated
voltage:V
|
3AC 400V±5%
|
Output rated
frequency:Hz
|
50/ 60 ±0.2
|
Output current THD
rate:
|
<3%
|
Negative sequency
voltage(The unbalance of three phase
|
2%
|
Inverter
efficiency
|
96%
|
Electromagnetic
compatibility
|
Resist 2500V
impulse interference
|
Cooling mode:
|
Forced air cooling
|
Blades quantity:
|
2Group
|
Windmill
diameter(m):
|
11
|
Tower height(m):
|
12m
|
Adjustment mode(m):
|
Blades change
angle
|
Brake mode:
|
Hydraulic position
brake wind speed should ≤2.9 m/s
|
Noise: dB(A)
|
≤65db
Wind speed 5m/s with 10m distance
|
Temperature :
|
-45—55℃
|
Yaw protection
|
Voltage
protection
|
Current Protection
|
Wind speed
protection
|
Rotating speed
protection
|
|

The angle of the blade can be adjusted by the eccentric rod, controlled by the controller that collects data from anemometer and dogvane.
Under normal wind speed, the blades obtain maximum windward area by just face toward the wind direction. Then the rotation speeds up to achieve the maximum wind utilization.
However, under extreme high wind the blades decrease its windward area to slow down the rotation to protect the device.

